Waking up seeing an uneven drywall isn’t a pleasant experience at all. Even a slight height difference of your drywall makes it look like a big error. And anyone who’s facing it would like to get rid of this problem with ease.
How to fix uneven drywall seams?
Fixing the uneven drywall seams is not a mammoth task. You’ll just have to follow the correct instructions. Efficiently using some drywall compound and straightening it properly will do the trick. Along with that, some supporting equipment like a drywall knife, sandpaper, etc. will be needed.
In case you’re still wondering how to do it, don’t get worried. We’ve discussed the whole process in this article. Have a read to clearly understand.
5 Steps to Fix Uneven Drywall Seams
Uneven drywalls may look ugly and annoying. But fixing the problem is not so hard. You can do it on your own. Here we’ve described how to fix uneven drywall seams in 5 easy steps. The steps are as follows-
Step 1 of 5: Cleaning the Wall
Before you start to work, your wall should be clean. There should be no dust or other residues on the wall.
For cleaning the wall, you can use soap and water or any other cleaning substance. But keep in mind that the cleaning should not make your wall condition worse. For example, don’t soak your wall in the water. Or else, there will be water clogged in your basement and floor.
If you’re looking for drywall cleaning materials, you can check the products below. We’ve got some great suggestions for you:
We hope this will help you to clean the wall properly. Find the suitable products for you.
Step 2 of 5: Sanding the Wall
In this step, use sandpaper. I prefer 120-grit sandpaper to remove the bumps and additional residues. A sanding pole can be handy while sanding higher places or the ceiling.
Applying a primer after sanding the wall properly is greatly encouraged. But make sure you’re not choosing the white primer.
Step 3 of 5: Applying First Coat of Drywall Compound
Now it’s time to do the main work. Store drywall compound in a pan. After that, scoop a mound of drywall compound on the edge of a tapered knife.
Fill the gaps which are making the drywall look uneven using the drywall compound. Spread the compound evenly by pressing it. Fill in the largest gaps on the first attempt.
Don’t apply too much drywall compound at the first go and allow it to dry.
If you don’t know where to buy drywall compounds, we’ve some suggested ones:
Here you will find your desired drywall compound. They can serve you well in the long run.
Step 4 of 5: Applying Drywall Compound Completely
Apply a broad layer of drywall compound throughout the entire surface. Use the knife to apply the compound properly. Press the areas where the compound dips in and fill them accurately.
Remove the excess compound with the knife and restore them to the pan. Remove the compound from the knife’s edges as well and make it clean.
After that, run the flat side of the knife. Run it across the wet compound to smoothen the surface.
Make the transition between the existing wall and drywall compound smooth. Finally, allow the wet compound to dry.
Step 5 of 5: Finishing Up
As you’ve done the hard work, now it’s time to wrap up and finish the project. Take a sanding sponge and dampen it.
Rotate the sponge in a circular pattern along the drywall compound area. Make the drywall compound area smoother and blend the edges. If there’s any uneven peak on the drywall compound applied area, flatten it with a sponge.
Thus finish the work of fixing uneven drywall seams.
Getting hurt while fixing your uneven drywall isn’t something you want to face. Maintaining safety is always important.
While working, follow the safety measures stated below:
- Use hand gloves while working. Or else your skin can get exposed to chemical substances.
- Carefully, use the knife. Don’t hurt your hands while operating the knife on the surface.
- Sandpaper can be rough on your skin. So, use that carefully.
- Make sure that you’re using a good quality product. Otherwise, it will not fulfill the purpose.
- Don’t forget to have alternative arrangements like a temporary shower if you’re working in your bathroom.
Follow these safety guidelines to keep yourself out of danger.
Question: What is the reason for the bulge in drywall seams?
Answer: The most common reason for drywall seam bulging is improper installation. Taking shortcuts or making mistakes while installing causes this problem to occur.
Question: Do primers hide drywall imperfections?
Answer: The texture of primers significantly impacts how well you can hide the imperfections. So, they are partially helpful for hiding drywall imperfections.
Question: What can remove drywall lines?
Answer: You can use paper tape and then apply joint compound to hide drywall lines. Apply the joint compound to hide the edges of paper tape.
Question: Joint compound or spackle – which one to choose?
Answer: Joint compound is the better choice here. Because spackle is better for filling medium to large holes.
We’re now at the end of how to fix uneven drywall seams. We hope you gathered all the things you need.
You might consider painting your wall after finishing the work to make it look beautiful. Also, it will additionally hide the drywall joints with the compound.
That’s all from us. Have a good day!
- Recent Posts
By profession, I’ve been a Cytogenetic Technologist for about 24 years of my career. For those who don’t understand what on earth that is, Cytogenetic technologists, are laboratory specialists who study normal and abnormal chromosomes in cells, and their relationship to disease and human development.
Latest posts by Richard Allen (see all)
- How to Make a 240-Volt Extension Cord [8-Step Method] – March 29, 2022
- GE Dryer Reset Button: All the Whereabouts – March 29, 2022
- Does a Garbage Disposal Need a GFCI [Effects and Guidelines] – March 29, 2022