Home > iPhone Issues > iPhone Dead? Try These 5 Ways to Fix and Resurrect It
December 3, 2018 (Updated: July 30, 2021)
3 min read
“Help! My iPhone is dead and won’t turn on no matter how many times I restart it. Is there anyone who can help?”
Sometimes when your iPhone is fully charged and you want to use it, as usual, it only shows the black screen and looks completely dead. This problem can happen to any iPhone users. Depending on the case, it may be easily fixed, but most likely, it will take great effort. In this article, we will help you fix a dead iPhone with the following solutions.
Check if the Dead iPhone is Caused by Software or Hard Problem
Before we start troubleshooting, it’s important to learn what caused the iPhone dead issue. Determining whether it’s just software glitch that prevents the iPhone from starting up normally or the hardware issue can help better fix this problem.
The following questions can help you make a preliminary judgment:
- Did you recently drop your iPhone into the water?
- Will iTunes fail to recognize your dead iPhone when plugged in?
- For iPhone 7 and later users, there will be a response when pressing the home button but the screen still stays black?
- Does your iPhone refuse to charge?
If all the answers are yes, then there is a high possibility of hardware issues. You are recommended to take the dead iPhone to Apple Support Center or local repair shop and have the Pros check it. If not, you can follow the solutions below to fix the software problem.
- Tip 1: Charge Your Dead iPhone for A While
- Tip 2: Hard Reset the Dead iPhone
- Tip 3: Fix iPhone Dead Problem without Data Loss
- Tip 4: Restore Dead iPhone to Factory Settings
- Tip 5: If All Failed, Check Hardware Problem
Tip 1: Charge Your Dead iPhone for A While
The first suggestion is about charging the iPhone completely dead battery for the small while. It might be possible that you have run out battery or iPhone might automatically shut down because of the cold weather. So you should keep your device on the charging mode for a couple of minutes. If it shows the charging screen, then there should be no severe issue. You can then try to restart the “dead” iPhone.
Tip 2: Hard Reset the Dead iPhone:
If you still cannot fix the problem that the iPhone is dead and won’t charge, performing a hard reset somehow will help.
iPhone 12/11/11 Pro/XS（Max）/XR/X/8
iPhone 7/7 Plus
iPhone 6/6s/SE/5 and earlier
|Press and release the volume up button on the left side, then press and release the volume down button. Keep holding the sleep/wake button until you see the Apple logo screen.||Hold down the volume down button and sleep/wake button for about 10 seconds. Release when you see the Apple logo appears.||Hold down the home button and sleep/wake button for 10 seconds until the Apple logo appears on your screen.|
Tip 3: Fix iPhone Dead Problem without Data Loss
If you’ve determined that it’s the software issue that caused your iPhone becomes completely dead, you can easily get this problem fixed using a 3-rd party tool called iMyFone Fixppo. It’s an outstanding iOS system recovery tool that supports to fix various iOS problems caused by software, for example, iPhone stuck on a black screen, iPhone stuck on Apple logo and more. Fixppo follows the newest tech and updates, makes users using the newest device like iPhone 12 running latest iOS version including iOS 15 beta 3/2/1 also benefit from it.
This software provides 2 modes to fix your dead iPhone: the Standard Mode and Advanced Mode. This will ensure a higher success rate. Even if you know nothing about software repair, you can operate it easily. The following steps will walk you through how to fix an iPhone that’s completely dead without losing data.
Step 1: Download and install Fixppo on your PC/Mac. After installation, select Standard Mode from the main interface.
Step 2: Connect your device with the computer and click the Next button. If no device is detected, follow the instructions showed on the screen to enter recovery mode/DFU mode first.
Step 3: Now you can download the firmware online. Fixppo provides all the available iOS version and you are free to choose one to move to the next step.
Step 4: Once the firmware is ready, you can click the Start button and the repairing process will soon start. Sit your dead iPhone patiently until the process finishes.
Tip 4: Restore Dead iPhone to Factory Settings
Another attempt is restoring your dead iPhone with iTunes. By using this way, you will lose all the data on your device if there are no backup files. Steps are listed below:
Step 1: Connect your iPhone with iTunes and put your device into DFU mode.
Step 2: iTunes will pop up a message saying your device needs to be restored first.
Step 3: Click Restore and agree on the terms and conditions.
Step 4: iTunes will then download the software and repair your dead iPhone.
Tip 5: If All Failed, Check Hardware Problem
The last tip is all about checking away from the hardware problem. There would be somehow battery or other software damage; we would recommend readers to straightaway check and replace hardware as soon as possible.
If you want your iPhone to get best repaired, then without wasting any time download and install iMyFone Fixppo right now! They will rather make your iPhone repairing task easy much. Go for it now!